Sample Home Inspection Report

This annotated sample report shows what a real home inspection report looks like: a summary of material defects, severity ratings, findings by section with what was observed, why it matters and what to do next. Filter by severity, hide sections, turn the reading tips on or off, and download a free blank report template.

How to use the sample report

  1. Read the Summary first. It lists the safety hazards and major repairs, the items that matter most in a negotiation.
  2. Use the severity filter to focus on safety hazards or repairs.
  3. Turn on the reading tips to see how to read each part of a report.
  4. Download the blank template (.doc, opens in Word or Google Docs) if you want a simple report layout.

The property

123 Sample Street, Anytown, USA (fictional). Single-family, 2 stories, built 1987, 2,150 sq ft, vented crawlspace. Weather: Clear, 68°F, dry for 3 days.

Severity ratings used in the report

Rating Meaning
Safety hazard Fix before move-in. A risk of injury, fire, shock or gas exposure.
Repair / replace Material defect. Get a licensed contractor's evaluation and quote.
Maintenance Routine upkeep or a small repair.
Monitor / info Not a defect today. Note it and watch it.

Summary of material defects in the sample

Section Location Finding Rating
Roof Rear slope above the kitchen Several shingles are creased and lifted, and two are missing. Exposed nail heads are visible. Repair / replace
Exterior and grounds Rear deck stairs The stair handrail is loose and the guard balusters are about 6 inches apart. Safety hazard
Exterior and grounds Deck ledger board The ledger is nailed to the rim joist; no bolts or flashing are visible. Repair / replace
Foundation, crawlspace and structure Crawlspace, below the hall bathroom The subfloor is stained and soft when probed. The moisture meter read high. Repair / replace
Electrical Main panel Two circuits are double-tapped on one breaker, and one knockout is open. Safety hazard
Electrical Kitchen counter and exterior outlets No GFCI protection at the counter outlets or the rear exterior outlet. Safety hazard
Electrical Hallway, bedrooms No carbon monoxide alarm. The home has gas appliances and an attached garage. Safety hazard
Plumbing Hall bathroom toilet The toilet rocks and the flooring at the base is soft. Repair / replace
Plumbing Water heater The TPR discharge pipe ends 18 inches above the floor and is reduced in size. Safety hazard
Heating and cooling AC condenser The temperature split between return and supply air was 9°F; the condenser fins are crushed. Repair / replace
Garage Garage vehicle door The door did not reverse when the photo-eye beam was blocked. Safety hazard
Garage Door into the house Hollow-core interior door between the garage and the house. Repair / replace

How to read a home inspection report

  • Start with the summary, then read the full section behind each item. Summaries leave out context.
  • Check the limitations. Every report lists areas the inspector could not see, such as a blocked crawlspace or a roof viewed only from the ground.
  • Read the recommendation line. "Evaluate by a licensed electrician" means the inspector found a symptom, not the full cause or cost. Get that evaluation before your contingency deadline.
  • Look at the photos. A good report shows each defect, which helps your agent, the seller and contractors.
  • Separate maintenance from defects. Old but working equipment is not a defect on its own, but it is a budgeting item.

When you are ready to negotiate, use our repair request letter builder.

Related guides

About this sample

Original sample written by Inspector Atlas for illustration. Fictional property; not copied from any inspector or software vendor. Scope follows the InterNACHI and ASHI standards of practice.

Sources

Frequently asked questions

A description of the property and conditions on the day, the scope and limitations, a summary of material defects, and section-by-section findings for the roof, exterior, structure, electrical, plumbing, HVAC, attic, interior and garage, usually with photos and recommendations.

Many run 30 to 60 pages with photos. The summary is usually a few pages.

Most inspectors deliver it the same day or within 24 to 48 hours. Some states set a delivery deadline.

Most reports sort findings into safety hazards, items needing repair or replacement, routine maintenance, and items to monitor. The exact labels vary by inspector and software.

Yes. Download the blank template from the tool above. It opens in Word or Google Docs and follows the same section layout.

Yes. Buyers commonly share the relevant pages with the seller with a repair request. The report belongs to the client who paid for it.