How to Become a Home Inspector in Washington

Updated November 2026. Checked against the state regulator and BLS wage data.

Washington requires a state license to work as a home inspector. You must complete 120 hours of pre-license education, gain 40 hours of field training with an experienced inspector, and pass the National Home Inspector Examination plus a state exam. The Washington State Department of Licensing oversees the process through the Home Inspector Advisory Licensing Board. Many people start with approved training to cover the basics of structure, electrical, plumbing, and roofing. Once licensed, you must renew every two years and complete 24 hours of continuing education.

Washington home inspector requirements at a glance

Requirement Washington
License required Yes
Credential License (Home Inspector)
Pre-license training 120 hours
Field training 40 hours of field training, including 5 inspections, with an inspector licensed 4+ years
Exam NHIE plus Washington state exam
Insurance None stated by DOL
Fees License $720; exam $300
Renewal Every 2 years
Continuing education 24 hours every 2 years
Regulator Washington State Department of Licensing (Home Inspector Advisory Licensing Board)

Compare every state in the home inspector license requirements table.

Steps to become a home inspector in Washington

  1. Complete 120 hours of pre-license education from a board-approved provider.
  2. Complete 40 hours of field training, including 5 inspections, under an inspector licensed for 4 or more years.
  3. Pass the National Home Inspector Examination (NHIE).
  4. Pass the Washington state home inspector exam.
  5. Submit a license application to the Washington State Department of Licensing with the $720 fee.
  6. Maintain your license by completing 24 hours of continuing education every 2 years.

Training and the exam

Washington requires you to finish 120 hours of approved classroom or online training before you can apply. The training covers the systems and components you will inspect, including structure, exterior, roofing, electrical, plumbing, heating, cooling, and interiors. You also need 40 hours of field training with an inspector who has been licensed for at least 4 years. During that time you must complete at least 5 inspections under supervision. After training, you take the National Home Inspector Examination, which is a computer-based test covering national standards and report writing. Then you take a separate Washington state exam that tests state law and regulations. The exam fee is $300. If you are an out-of-state inspector licensed for at least 2 of the last 4 years, you only need to take the state portion.

Insurance

Washington State Department of Licensing does not require home inspectors to carry general liability or errors and omissions insurance. Even so, most inspectors buy both. E&O insurance can cover you if a client claims you missed a major defect. General liability can cover damage you cause while working in a home, such as breaking a window or causing a leak. Without insurance, one lawsuit could cost you your business. Talk to an insurance agent who understands home inspection work before you start.

Published premiums for a new inspector run about $600 to $2,500 a year for errors and omissions (E&O) and about $400 to $1,000 for general liability. Estimate yours with the home inspector insurance cost estimator.

How much home inspectors make in Washington

BLS measure (May 2025) Washington US
Median annual pay $96,140 $74,690
Mean annual pay $93,070 $77,730
Lowest 10% earn under $63,840 $47,140
Top 10% earn over $121,700 $114,200
Employed 3,090 146,720

The Bureau of Labor Statistics reports a median annual wage of $96,140 for inspectors in Washington, with a mean of $93,070. The lowest 10 percent earn about $63,840, while the top 10 percent earn about $121,700. These figures include construction and building inspectors, not just home inspectors, and they exclude self-employed inspectors, who make up a large share of the field. Home inspector income can vary widely by location, volume, and whether you work for a company or run your own business.

See pay by state and metro, and model your own numbers, on the home inspector salary page.

Notes on the Washington rules

Out-of-state inspectors licensed 2 of the last 4 years take only the state portion of the exam.

Related guides

Washington home inspector license FAQs

Complete 120 hours of approved pre-license education, then 40 hours of field training with 5 inspections under an inspector licensed at least 4 years. Pass the NHIE and the Washington state exam, then apply to the Department of Licensing with the $720 fee.

The license application fee is $720 and the exam fee is $300. You will also pay for pre-license training and field training, which vary by provider. Continuing education is required every 2 years and adds cost.

The timeline depends on your schedule. Pre-license education is 120 hours, and field training is 40 hours. Many people finish within 3 to 6 months if they study full time, but part-time students may take a year or more.

Washington does not require home inspectors to carry insurance. But errors and omissions insurance and general liability are strongly recommended because they protect you from lawsuits and property damage claims.

The median annual wage for inspectors in Washington is $96,140, with the top 10 percent earning $121,700. But those figures include construction and building inspectors and exclude self-employed inspectors, so home inspector income can differ.

Sources: Washington State Department of Licensing (Home Inspector Advisory Licensing Board), rule, statute or reference source, BLS OEWS May 2025, SOC 47-4011. BLS figures cover construction and building inspectors, including home inspectors, and exclude the self-employed.