Home Inspection Cost in Washington
Updated November 2026. Prices below are estimates, not quotes.
A home inspection in Washington typically costs between $320 and $535, with most buyers paying around $375. That is slightly above the national typical of $350, largely due to the state's higher cost of living. Price depends on home size, age, and location, with larger or older homes and those far from an inspector's base costing more.
Quick answer: a standard inspection of a single-family home in Washington typically runs about $320 to $535, with many buyers paying close to $375. Add-on tests such as radon or a sewer scope are extra.
Typical home inspection prices in Washington
Published national surveys put a standard inspection at about $300 to $500. We adjust those ranges by the Bureau of Economic Analysis price index for Washington (107.0, where the US average is 100). That index tracks general living costs, not inspection fees, so treat the Washington column as a starting estimate and get two or three quotes.
| Home size | Published national range | Washington estimate |
|---|---|---|
| Under 1,000 sq ft | $200 to $250 | $215 to $270 |
| 1,000 to 1,500 sq ft | $250 to $300 | $270 to $320 |
| 1,501 to 2,000 sq ft | $300 to $400 | $320 to $430 |
| 2,001 to 2,500 sq ft | $400 to $450 | $430 to $480 |
| 2,501 to 3,000 sq ft | $450 to $500 | $480 to $535 |
| Over 3,000 sq ft | about $25 more per extra 500 sq ft, or $0.18 to $0.25 per sq ft | quote-based |
Want a number for a specific house? Try the home inspection cost calculator.
Add-on tests and what they cost
These are national published ranges. Booking a test with the main inspection is often cheaper than ordering it separately.
| Add-on | Typical published range | When it is worth it |
|---|---|---|
| Radon test | $125 to $400 | Radon is invisible and only shows up on a test. Worth doing in any home with a basement or slab on soil. |
| Mold inspection/testing | $300 to $650 | Useful when there is a musty smell, past leaks or visible staining. A visual inspection is part of the standard visit. |
| Sewer scope (camera) | $125 to $500 | A camera run through the main sewer line. Most useful for homes with older clay or cast iron pipe or big trees in the yard. |
| Termite / WDO inspection | $50 to $350 | Looks for termites and other wood-destroying insects. VA loans and many lenders in termite-prone areas ask for one. |
| Septic inspection | $150 to $650 | For homes not on city sewer. Usually done by a septic contractor, sometimes with a pump-out. |
| Well & water testing | $250 to $550 | For homes on a private well. FHA, VA and USDA loans can require a water test. |
In Washington, sewer scope and mold testing are especially relevant. Older sewer lines are common in many urban and suburban areas, and the damp climate raises mold risk. Radon testing is less common than in some states but still worth considering in certain counties. Termite inspections are less of a concern than in warmer regions.
What changes the price in Washington
Washington's housing stock ranges from older Seattle bungalows to newer suburban builds, so age and condition can push inspection time and fees up. The wet climate means buyers often worry about moisture, roof condition, and drainage, so inspectors may spend more time on those areas. Many homes have basements or crawlspaces, which can add complexity. Rural properties may incur travel fees if the inspector has to drive far. Common add-ons in the state include sewer scopes and mold testing, given the prevalence of older sewer lines and damp conditions.
Common reasons a quote comes in higher, from published cost guides:
- Older homes: pre-1980s houses can add $100 to $200 for extra time and materials checks.
- Crawlspaces and basements: more area to cover and harder access.
- Travel: some inspectors charge $1 to $2 per mile beyond a free radius of 20 to 60 miles.
- Extra structures: detached garages, guest houses and barns add about $25 to $50 each.
- Hourly billing: when billed by time, expect roughly $80 to $150 per hour.
Licensing in Washington
Washington requires a state credential (License (Home Inspector)) to inspect homes for pay. The regulator is Washington State Department of Licensing (Home Inspector Advisory Licensing Board).
Washington requires home inspectors to hold a state credential. This means you can ask for proof of licensing before hiring. A licensed inspector has met state standards for training and practice, which can help you choose someone qualified without relying on directory claims.
How to save on a home inspection in Washington
- Get quotes from at least three inspectors to compare prices and what is included.
- Bundle add-on tests like sewer scope or mold testing with the main inspection for a possible discount.
- Ask if there is a travel fee and how far they travel for free before you book.
- Inspect smaller homes yourself for obvious issues before hiring, so you can ask focused questions and avoid unnecessary add-ons.
- Book your inspection early in the process so you can negotiate repairs with the seller instead of paying for them later.
Find inspectors and compare quotes
- Browse home inspectors in Washington (537 inspection businesses on file across 133 cities)
- Home inspection cost calculator
- What do home inspectors look for?
Washington home inspection cost FAQs
Washington's higher cost of living drives up labor and business costs. The typical inspection is around $375, compared to $350 nationally. Wet climate concerns like moisture and roof damage may also add time, and travel fees in rural areas can raise the price.
A sewer scope can cost $125 to $500 extra, depending on the plumber or inspector. In Washington, where many older homes have aging sewer lines, this test is often worth the money. It can reveal blockages or breaks that would be expensive to fix later.
Mold testing costs $300 to $650. Because of Washington's damp climate and frequent rain, mold can be a hidden issue in basements and crawlspaces. If you see signs of water damage or smell musty odors, a mold inspection can identify problems before you close.
For a home under 1,000 square feet, the inspection typically costs between $215 and $270. That is lower than the overall state range because smaller spaces take less time to inspect. Condos may also skip exterior and roof checks, which can reduce the fee.
Ask for their Washington state home inspector license number and verify it with the state. A licensed inspector has met state requirements for training and practice, which protects you from unqualified individuals. Also ask about their experience with homes like the one you are buying.
Sources: Angi (2026), HomeGuide (2024), Fixr (2025), BEA Regional Price Parities, 2024.