Home Inspection Cost in Washington, DC
Updated November 2026. Prices below are estimates, not quotes.
In District of Columbia, a home inspection typically costs between $330 and $550, with most buyers paying around $385. National prices range from $300 to $500, so DC runs slightly higher. The higher cost reflects the local market and the age and density of housing stock. For a rowhouse or condo, the size of the home and any add-on tests will move the final price within this range.
Quick answer: a standard inspection of a single-family home in District of Columbia typically runs about $330 to $550, with many buyers paying close to $385. Add-on tests such as radon or a sewer scope are extra.
Typical home inspection prices in District of Columbia
Published national surveys put a standard inspection at about $300 to $500. We adjust those ranges by the Bureau of Economic Analysis price index for District of Columbia (109.9, where the US average is 100). That index tracks general living costs, not inspection fees, so treat the District of Columbia column as a starting estimate and get two or three quotes.
| Home size | Published national range | District of Columbia estimate |
|---|---|---|
| Under 1,000 sq ft | $200 to $250 | $220 to $275 |
| 1,000 to 1,500 sq ft | $250 to $300 | $275 to $330 |
| 1,501 to 2,000 sq ft | $300 to $400 | $330 to $440 |
| 2,001 to 2,500 sq ft | $400 to $450 | $440 to $495 |
| 2,501 to 3,000 sq ft | $450 to $500 | $495 to $550 |
| Over 3,000 sq ft | about $25 more per extra 500 sq ft, or $0.18 to $0.25 per sq ft | quote-based |
Want a number for a specific house? Try the home inspection cost calculator.
Add-on tests and what they cost
These are national published ranges. Booking a test with the main inspection is often cheaper than ordering it separately.
| Add-on | Typical published range | When it is worth it |
|---|---|---|
| Radon test | $125 to $400 | Radon is invisible and only shows up on a test. Worth doing in any home with a basement or slab on soil. |
| Mold inspection/testing | $300 to $650 | Useful when there is a musty smell, past leaks or visible staining. A visual inspection is part of the standard visit. |
| Sewer scope (camera) | $125 to $500 | A camera run through the main sewer line. Most useful for homes with older clay or cast iron pipe or big trees in the yard. |
| Termite / WDO inspection | $50 to $350 | Looks for termites and other wood-destroying insects. VA loans and many lenders in termite-prone areas ask for one. |
| Septic inspection | $150 to $650 | For homes not on city sewer. Usually done by a septic contractor, sometimes with a pump-out. |
| Well & water testing | $250 to $550 | For homes on a private well. FHA, VA and USDA loans can require a water test. |
Radon testing is the add-on most relevant in District of Columbia, given the geology of the Mid-Atlantic. Mold testing is also common in older homes with basements that may have had leaks. A sewer scope is wise for rowhouses with old lateral lines. Termite inspections are less critical but still requested for homes with wood framing.
What changes the price in District of Columbia
District of Columbia prices are pushed up by older housing stock, which often means outdated electrical panels, cast iron plumbing, and hidden deferred maintenance. Many homes are rowhouses or condos, so inspectors may spend extra time checking shared walls and roof systems. Basements are common and can hide moisture issues, so inspectors look closely at foundation walls and sump pumps. Travel is rarely a factor inside the District, but parking can be difficult, which may add time. Buyers here often add radon testing because the region has elevated indoor radon levels.
Common reasons a quote comes in higher, from published cost guides:
- Older homes: pre-1980s houses can add $100 to $200 for extra time and materials checks.
- Crawlspaces and basements: more area to cover and harder access.
- Travel: some inspectors charge $1 to $2 per mile beyond a free radius of 20 to 60 miles.
- Extra structures: detached garages, guest houses and barns add about $25 to $50 each.
- Hourly billing: when billed by time, expect roughly $80 to $150 per hour.
Licensing in District of Columbia
District of Columbia has no statewide home inspector license. There is no state board for home inspectors, so ask each inspector about training, insurance and memberships.
District of Columbia has no statewide home inspector license, so anyone can call themselves a home inspector. That means you should ask about experience, training, and membership in a professional association. Look for a sample report and check reviews from past clients. Choosing carefully matters more here than in states with strict licensing.
How to save on a home inspection in District of Columbia
- Book your inspection early in the week, when inspectors are less busy, and ask if they offer a discount for weekday appointments.
- Ask for a bundled price if you need radon, mold, or sewer scope testing at the same time.
- Get quotes from at least three inspectors, but compare what is included, not just the fee.
- Attend the inspection yourself so you can ask questions and learn about the house, which may save you money on future repairs.
- Skip add-ons that do not apply to your property, like septic testing for a home on city sewer.
Find inspectors and compare quotes
- Browse home inspectors in District of Columbia (16 inspection businesses on file across 1 cities)
- Home inspection cost calculator
- What do home inspectors look for?
District of Columbia home inspection cost FAQs
Most DC buyers pay between $330 and $550, with a typical cost around $385. The exact price depends on home size, age, and whether you add tests like radon or sewer scope. Condos and smaller rowhouses are usually at the lower end.
No, DC does not require a home inspection by law. But most real estate contracts include an inspection contingency. That lets you back out or negotiate repairs if the inspector finds serious problems. Skipping it is risky, especially on older homes.
Yes. Radon levels in DC are often above the EPA action level. Radon testing costs $125 to $400 extra and takes about two days. If levels are high, you can ask the seller to install a mitigation system before closing.
No. The District does not license home inspectors. That means there is no state exam or continuing education requirement. You should ask about an inspector's training, years of experience, and whether they belong to a national association like ASHI or InterNACHI.
A standard inspection covers the roof, foundation, electrical, plumbing, heating, cooling, and major appliances. It is visual only. The inspector will not move furniture or open walls. In DC, expect extra attention to old wiring, cast iron pipes, and basement moisture.
Sources: Angi (2026), HomeGuide (2024), Fixr (2025), BEA Regional Price Parities, 2024.