Home Inspection Cost in Utah

Updated November 2026. Prices below are estimates, not quotes.

A standard home inspection in Utah typically costs between $295 and $495, with most buyers paying around $345. That puts Utah just below the national midpoint, where typical fees run about $350. Your actual price depends on home size, age, and the add-ons you choose.

Quick answer: a standard inspection of a single-family home in Utah typically runs about $295 to $495, with many buyers paying close to $345. Add-on tests such as radon or a sewer scope are extra.

Typical home inspection prices in Utah

Published national surveys put a standard inspection at about $300 to $500. We adjust those ranges by the Bureau of Economic Analysis price index for Utah (98.9, where the US average is 100). That index tracks general living costs, not inspection fees, so treat the Utah column as a starting estimate and get two or three quotes.

Home size Published national range Utah estimate
Under 1,000 sq ft $200 to $250 $200 to $245
1,000 to 1,500 sq ft $250 to $300 $245 to $295
1,501 to 2,000 sq ft $300 to $400 $295 to $395
2,001 to 2,500 sq ft $400 to $450 $395 to $445
2,501 to 3,000 sq ft $450 to $500 $445 to $495
Over 3,000 sq ft about $25 more per extra 500 sq ft, or $0.18 to $0.25 per sq ft quote-based

Want a number for a specific house? Try the home inspection cost calculator.

Add-on tests and what they cost

These are national published ranges. Booking a test with the main inspection is often cheaper than ordering it separately.

Add-on Typical published range When it is worth it
Radon test $125 to $400 Radon is invisible and only shows up on a test. Worth doing in any home with a basement or slab on soil.
Mold inspection/testing $300 to $650 Useful when there is a musty smell, past leaks or visible staining. A visual inspection is part of the standard visit.
Sewer scope (camera) $125 to $500 A camera run through the main sewer line. Most useful for homes with older clay or cast iron pipe or big trees in the yard.
Termite / WDO inspection $50 to $350 Looks for termites and other wood-destroying insects. VA loans and many lenders in termite-prone areas ask for one.
Septic inspection $150 to $650 For homes not on city sewer. Usually done by a septic contractor, sometimes with a pump-out.
Well & water testing $250 to $550 For homes on a private well. FHA, VA and USDA loans can require a water test.

Radon testing is the add-on most Utah buyers book, since radon is common in the state and can be found in any home. Sewer scopes are also worth considering for older homes with mature trees or known pipe issues. Mold testing is less common but useful after a musty basement or water stain.

What changes the price in Utah

Utah prices track home size closely. A small condo or townhome under 1,000 square feet runs $200 to $245, while a 2,501 to 3,000 square foot house costs $445 to $495. Older homes add $100 to $200 because inspectors need more time for dated wiring, plumbing, and structural checks. Many Utah homes have basements, which adds square footage and inspection time. Rural or mountain properties may trigger travel fees beyond the free radius, especially in resort areas like Park City or St. George. Buyers commonly add radon testing because Utah has elevated radon potential across much of the state.

Common reasons a quote comes in higher, from published cost guides:

  • Older homes: pre-1980s houses can add $100 to $200 for extra time and materials checks.
  • Crawlspaces and basements: more area to cover and harder access.
  • Travel: some inspectors charge $1 to $2 per mile beyond a free radius of 20 to 60 miles.
  • Extra structures: detached garages, guest houses and barns add about $25 to $50 each.
  • Hourly billing: when billed by time, expect roughly $80 to $150 per hour.

Licensing in Utah

Utah requires a state credential (Private Home Inspector license) to inspect homes for pay. The regulator is Utah Division of Professional Licensing (DOPL).

Utah requires every paid home inspector to hold a state license. Before hiring, confirm the inspector's license is active and ask about any specialty training for radon or sewer scope work. Licensing establishes minimum standards, but experience and local knowledge still vary.

How to save on a home inspection in Utah

  • Ask for a bundled quote if you want radon or sewer scope testing, since many Utah inspectors discount packages.
  • Book your inspection early in the process to avoid rush fees and have time to compare quotes.
  • Inspect a newer home without obvious add-on risks first, then decide if extra tests are justified.
  • Split the cost of a sewer scope with the seller if it is a common contingency in your market.
  • Reuse a recent radon test result from the seller instead of paying for a duplicate.

Find inspectors and compare quotes

Utah home inspection cost FAQs

Most Utah buyers pay $345 for a standard inspection, with a typical range of $295 to $495. The final price depends on home size, age, and any add-ons like radon or sewer scope.

No, Utah law does not require a home inspection to buy or sell a house. However, most lenders and real estate agents recommend one to protect your purchase.

Radon testing is not required, but Utah has elevated radon potential in many areas. A radon test costs $125 to $400 and is often the first add-on buyers choose.

Most Utah inspections take two to three hours, depending on home size and condition. Larger or older homes may take longer, especially if you add sewer scope or mold testing.

The buyer typically pays for the home inspection in Utah. You can sometimes negotiate the seller to cover the cost as part of the purchase contract.

Sources: Angi (2026), HomeGuide (2024), Fixr (2025), BEA Regional Price Parities, 2024.