Home Inspection Cost in Melbourne, FL

Updated November 2026. Prices are estimates based on Florida data, not quotes.

In Melbourne, FL, a home inspection typically runs between $310 and $515, with most buyers paying around $360. That's close to the national range of $300 to $500. But prices here can shift based on the home's size, age, and the inspector you pick. Melbourne's market includes older concrete block homes, newer construction, and everything in between, so the final bill often reflects what's under the roof.

Quick answer: expect roughly $310 to $515 for a standard single-family inspection in Melbourne. Larger and older homes cost more, and tests like radon or a sewer scope are extra.

Price by home size in Melbourne

Home size Published national range Florida estimate
Under 1,000 sq ft $200 to $250 $205 to $260
1,000 to 1,500 sq ft $250 to $300 $260 to $310
1,501 to 2,000 sq ft $300 to $400 $310 to $415
2,001 to 2,500 sq ft $400 to $450 $415 to $465
2,501 to 3,000 sq ft $450 to $500 $465 to $515
Over 3,000 sq ft about $25 more per extra 500 sq ft, or $0.18 to $0.25 per sq ft quote-based

The estimate column uses national published ranges adjusted by the Florida price index (103.4). City prices can run above or below the state figure.

Common add-ons

Add-on Typical published range When it is worth it
Radon test $125 to $400 Radon is invisible and only shows up on a test. Worth doing in any home with a basement or slab on soil.
Mold inspection/testing $300 to $650 Useful when there is a musty smell, past leaks or visible staining. A visual inspection is part of the standard visit.
Sewer scope (camera) $125 to $500 A camera run through the main sewer line. Most useful for homes with older clay or cast iron pipe or big trees in the yard.
Termite / WDO inspection $50 to $350 Looks for termites and other wood-destroying insects. VA loans and many lenders in termite-prone areas ask for one.
Well & water testing $250 to $550 For homes on a private well. FHA, VA and USDA loans can require a water test.
4-point inspection (FL insurance) $50 to $175 Roof, electrical, plumbing and HVAC snapshot that Florida insurers ask for on older homes.

What affects the price in Melbourne

Home size drives cost in Melbourne. Under 1,000 sq ft may run $205 to $260, while a 2,501 to 3,000 sq ft home could hit $465 to $515. Older homes often cost $100 to $200 extra due to wear, outdated systems, or code changes. If you're further out, travel fees of $1 to $2 per mile may apply beyond the first 20 to 60 miles. Add-ons like wind mitigation ($75 to $150) or 4-point inspections ($50 to $175) are common for insurance, and they add up fast.

Inspector Atlas has 23 home inspection businesses on file in Melbourne. Of those, 5 list wind mitigation, 5 list new construction, 4 list sewer scope, 4 list roof. Ask each one what their base fee includes before comparing prices.

Next steps

Melbourne home inspection cost FAQs

A full home inspection in Melbourne typically costs between $310 and $515, with a typical price near $360. The final amount depends on the home's square footage, age, and any extra services you add. Older homes or those over 2,500 sq ft usually land at the higher end.

Many Florida insurers ask for a 4-point inspection and wind mitigation report before they'll write a policy. In Melbourne, a 4-point inspection often runs $50 to $175, and wind mitigation $75 to $150. Your inspector can usually do both during the main inspection.

Yes. Florida requires a License (Home Inspector) from the DBPR to inspect homes for pay. That means any inspector you hire in Melbourne should hold a current state license. Always ask to see the license number before you book.

Common add-ons here include sewer scope ($125 to $500), termite/WDO inspection ($50 to $350), and mold testing ($300 to $650). If the home has a pool or spa, that's another $75 to $350. Your inspector can tell you which ones fit the property and your concerns.

Sources: Angi (2026), HomeGuide (2024), Fixr (2025), BEA Regional Price Parities, 2024.