Home Inspection Cost in Maryland

Updated November 2026. Prices below are estimates, not quotes.

A typical home inspection in Maryland costs between $315 and $525, with most buyers paying around $370. That is slightly above the national range of $300 to $500, mainly because of Maryland's higher living costs and older, varied housing stock. The final price depends on home size, age, location, and any add-on tests you choose.

Quick answer: a standard inspection of a single-family home in Maryland typically runs about $315 to $525, with many buyers paying close to $370. Add-on tests such as radon or a sewer scope are extra.

Typical home inspection prices in Maryland

Published national surveys put a standard inspection at about $300 to $500. We adjust those ranges by the Bureau of Economic Analysis price index for Maryland (105.0, where the US average is 100). That index tracks general living costs, not inspection fees, so treat the Maryland column as a starting estimate and get two or three quotes.

Home size Published national range Maryland estimate
Under 1,000 sq ft $200 to $250 $210 to $260
1,000 to 1,500 sq ft $250 to $300 $260 to $315
1,501 to 2,000 sq ft $300 to $400 $315 to $420
2,001 to 2,500 sq ft $400 to $450 $420 to $470
2,501 to 3,000 sq ft $450 to $500 $470 to $525
Over 3,000 sq ft about $25 more per extra 500 sq ft, or $0.18 to $0.25 per sq ft quote-based

Want a number for a specific house? Try the home inspection cost calculator.

Add-on tests and what they cost

These are national published ranges. Booking a test with the main inspection is often cheaper than ordering it separately.

Add-on Typical published range When it is worth it
Radon test $125 to $400 Radon is invisible and only shows up on a test. Worth doing in any home with a basement or slab on soil.
Mold inspection/testing $300 to $650 Useful when there is a musty smell, past leaks or visible staining. A visual inspection is part of the standard visit.
Sewer scope (camera) $125 to $500 A camera run through the main sewer line. Most useful for homes with older clay or cast iron pipe or big trees in the yard.
Termite / WDO inspection $50 to $350 Looks for termites and other wood-destroying insects. VA loans and many lenders in termite-prone areas ask for one.
Septic inspection $150 to $650 For homes not on city sewer. Usually done by a septic contractor, sometimes with a pump-out.
Well & water testing $250 to $550 For homes on a private well. FHA, VA and USDA loans can require a water test.

In Maryland, radon testing is the most commonly booked add-on, since radon levels are elevated in many parts of the state. Sewer scopes are worth considering for older homes, and mold testing helps in humid areas or houses with past water issues. Termite inspections matter because subterranean termites are active in Maryland.

What changes the price in Maryland

Maryland prices are shaped by older homes with basements, which are common in the state. Basements add square footage and often hide moisture, foundation, and drainage issues, so inspectors spend more time. Coastal and rural areas may have wells, septic systems, and longer travel distances, pushing costs higher. Many buyers add radon testing because Maryland has elevated radon potential in many counties. Sewer scopes are also useful in older neighborhoods with aging pipes.

Common reasons a quote comes in higher, from published cost guides:

  • Older homes: pre-1980s houses can add $100 to $200 for extra time and materials checks.
  • Crawlspaces and basements: more area to cover and harder access.
  • Travel: some inspectors charge $1 to $2 per mile beyond a free radius of 20 to 60 miles.
  • Extra structures: detached garages, guest houses and barns add about $25 to $50 each.
  • Hourly billing: when billed by time, expect roughly $80 to $150 per hour.

Licensing in Maryland

Maryland requires a state credential (License (Home Inspector)) to inspect homes for pay. The regulator is Maryland State Commission of Real Estate Appraisers, Appraisal Management Companies and Home Inspectors (Maryland Department of Labor).

Maryland requires a state credential to inspect homes for pay. When choosing an inspector, ask for their Maryland license number and check it with the state. A licensed inspector has met the state's training and exam standards, which gives you a baseline of competence. You should still ask about experience, sample reports, and add-on services.

How to save on a home inspection in Maryland

  • Book your inspection early and bundle add-ons like radon and sewer scope to negotiate a package discount.
  • Attend the inspection and ask questions, so you do not need a separate walkthrough or reinspection later.
  • Get quotes from at least three inspectors, but compare what is included, not just the base price.
  • If the seller has a recent inspection report, ask your inspector to review it instead of starting from scratch.
  • Avoid unnecessary add-ons like pool or septic inspections unless the home actually has those features.

Find inspectors and compare quotes

Maryland home inspection cost FAQs

In Maryland, a home inspection typically costs between $315 and $525, with most buyers paying around $370. The price varies by home size, age, location, and any add-on tests like radon or sewer scope. Larger or older homes are usually at the higher end of the range.

Maryland does not require a home inspection to buy a house, but it is strongly recommended. An inspection can reveal costly problems like foundation issues, roof leaks, or electrical hazards before you close. Most purchase contracts allow you to back out or negotiate repairs if significant issues are found.

A standard Maryland inspection covers the home's major systems: roof, foundation, electrical, plumbing, heating and cooling, insulation, and interior. The inspector checks for visible defects and safety concerns. It does not include specialized tests for radon, mold, sewer lines, or termites; those are add-on services.

Radon testing is highly recommended in Maryland because many counties have elevated radon levels. Radon is a radioactive gas that can cause lung cancer, and you cannot see or smell it. A radon test costs extra but is a small price compared to potential health risks.

A typical home inspection in Maryland takes 2 to 4 hours, depending on the home's size, age, and condition. Older homes or those with basements and crawl spaces may take longer. The inspector should provide a written report within a day, often sooner.

Sources: Angi (2026), HomeGuide (2024), Fixr (2025), BEA Regional Price Parities, 2024.