Home Inspection Cost in California
Updated November 2026. Prices below are estimates, not quotes.
A home inspection in California typically costs between $330 and $555, with most buyers paying around $385. That is slightly above the national average of $300 to $500. The final price depends on home size, age, location, and any extra tests you add.
Quick answer: a standard inspection of a single-family home in California typically runs about $330 to $555, with many buyers paying close to $385. Add-on tests such as radon or a sewer scope are extra.
Typical home inspection prices in California
Published national surveys put a standard inspection at about $300 to $500. We adjust those ranges by the Bureau of Economic Analysis price index for California (110.7, where the US average is 100). That index tracks general living costs, not inspection fees, so treat the California column as a starting estimate and get two or three quotes.
| Home size | Published national range | California estimate |
|---|---|---|
| Under 1,000 sq ft | $200 to $250 | $220 to $275 |
| 1,000 to 1,500 sq ft | $250 to $300 | $275 to $330 |
| 1,501 to 2,000 sq ft | $300 to $400 | $330 to $445 |
| 2,001 to 2,500 sq ft | $400 to $450 | $445 to $500 |
| 2,501 to 3,000 sq ft | $450 to $500 | $500 to $555 |
| Over 3,000 sq ft | about $25 more per extra 500 sq ft, or $0.18 to $0.25 per sq ft | quote-based |
Want a number for a specific house? Try the home inspection cost calculator.
Add-on tests and what they cost
These are national published ranges. Booking a test with the main inspection is often cheaper than ordering it separately.
| Add-on | Typical published range | When it is worth it |
|---|---|---|
| Radon test | $125 to $400 | Radon is invisible and only shows up on a test. Worth doing in any home with a basement or slab on soil. |
| Mold inspection/testing | $300 to $650 | Useful when there is a musty smell, past leaks or visible staining. A visual inspection is part of the standard visit. |
| Sewer scope (camera) | $125 to $500 | A camera run through the main sewer line. Most useful for homes with older clay or cast iron pipe or big trees in the yard. |
| Termite / WDO inspection | $50 to $350 | Looks for termites and other wood-destroying insects. VA loans and many lenders in termite-prone areas ask for one. |
| Septic inspection | $150 to $650 | For homes not on city sewer. Usually done by a septic contractor, sometimes with a pump-out. |
| Well & water testing | $250 to $550 | For homes on a private well. FHA, VA and USDA loans can require a water test. |
| Pool/spa inspection | $75 to $350 | Checks pumps, heaters, barriers and visible leaks on pools and spas. |
In California, termite inspections, sewer scopes, and pool inspections are especially common due to the climate and home styles. Mold testing is also frequently added in coastal or humid areas.
What changes the price in California
California prices run higher because of expensive housing markets, older housing stock, and varied construction styles. Many homes sit on concrete slabs, so sewer scopes are common, and stucco exteriors can hide moisture problems. Rural areas may add travel fees, while urban inspectors charge more due to higher overhead. Buyers often add termite, roof, and pool inspections, which push the total up.
Common reasons a quote comes in higher, from published cost guides:
- Older homes: pre-1980s houses can add $100 to $200 for extra time and materials checks.
- Crawlspaces and basements: more area to cover and harder access.
- Travel: some inspectors charge $1 to $2 per mile beyond a free radius of 20 to 60 miles.
- Extra structures: detached garages, guest houses and barns add about $25 to $50 each.
- Hourly billing: when billed by time, expect roughly $80 to $150 per hour.
Licensing in California
California has no statewide home inspector license. There is no state board for home inspectors, so ask each inspector about training, insurance and memberships.
California has no statewide home inspector license, so anyone can call themselves an inspector. Buyers should ask about experience, training, and membership in professional groups before hiring.
How to save on a home inspection in California
- Book early in the week when inspectors are less busy and may offer lower rates.
- Bundle a termite inspection with your home inspection to avoid a separate trip fee.
- Ask if the inspector offers a discount for paying at the time of service.
- Choose a smaller, local inspector over a franchise, which often charges more.
- Skip add-ons you don't need, like a pool inspection for a home without a pool.
Find inspectors and compare quotes
- Browse home inspectors in California (2,531 inspection businesses on file across 461 cities)
- Home inspection cost in Los Angeles
- Home inspection cost in Sacramento
- Home inspection cost in San Diego
- Home inspection cost in Fresno
- Home inspection cost calculator
- What do home inspectors look for?
California home inspection cost FAQs
Most buyers pay between $330 and $555, with a typical cost around $385. The price depends on home size, age, and extra tests like sewer scopes or mold.
Termite and sewer scope inspections are highly recommended. Many California homes are on slabs and prone to termite issues. Pool or spa inspections are sensible if the property has one.
California does not require home inspectors to hold a state license. That means you should check an inspector's training, experience, and professional memberships yourself before hiring.
Higher housing costs, older homes, and demand in urban areas push prices up. Travel to rural properties can also add fees. Typical costs run $330 to $555 compared to $300 to $500 nationally.
Some inspectors may offer discounts for weekday appointments, bundled services, or prompt payment. It never hurts to ask, but be wary of unusually low prices, which can signal inexperience.
Sources: Angi (2026), HomeGuide (2024), Fixr (2025), BEA Regional Price Parities, 2024.